It sure as hell isn't the nature of the round. They don't call it the 40 Short and Weak for nothing, and putting a 180 grain bullet downrange at 985 FPS is downright uninspiring compared to putting a 10mm 200 grain bullet downrange at 1200 FPS!! :mrgreen: :mrgreen: :mrgreen: Due to the fact that it'...

I shoot nothing but Seismic Sam's Blammo Brand Ammo!!!!

Bourbon street is for tourists, and tourists only - I have to agree on the Purple Haze - not sure why Abita Springs put out something like that. Abita Springs is about a 15 minute drive away from my back door, and apart from the brewery, it's sort of like Afton...

Maybe it's time for a few well-placed picketers at the front doors of Cabela's to get the store manager's attention to these statements issued by their own corporation, with pointed questions about where St. Paul City, MN is located?? Be sure to have LOTS of copies of the reply from Bass pro shops ...

Maybe it's time for a few well-placed picketers at the front doors of Cabela's to get the store manager's attention to these statements issued by their own corporation, with pointed questions about where St. Paul City, MN is located?? Be sure to have LOTS of copies of the reply from Bass pro shops t...

Age rules for hunting or age rules for buying ammo? In LA youth hunting is pretty much like MN, except a much larger % of the population do it. Isn't ammo purchase Federally regulated? At any rate, some lackey at Bass pro Shops probably read the wrong sentence and/or the maps, and has created this p...

JJ wrote:When you find a loose pocket on a hand primer, you'll know.

On a progressive? Good luck.

THIS!!!! ^^^^^^^^^^^^^^^^^^


You don't need a weatherman to know which way the primer blows...... Bob Dylan, 1964

60 reads, no replies.... Google is your friend, Grasshopper...... Tony Rumore made the original Saiga parts, but I'm pretty sure he's moved on from there, and if I were you I would track down whoever makes the 458 SOCOM these days. Marty ter Weem got a commercial firm to make his guns, and the Saiga...

I’m not sure if you can make an $800 gun into a $1,400 gun. At a home work bench. I 100% agree!! Based on my hand assembled and fitted 50 GI Model #1, when the Master gunsmith gets the slide and frame, they do NOT fit! It's the smith's job to lap the rails and grooves until they DO fit, and the fit...

Well, crbutler, thank you for the education on the 41 Spl. After finding no loading data for it in many manuals, the thought of a relative newbie buying both kinds of brass, and then keeping those two cases completely separate from each other even though they are going into the same gun seemed like ...

My x-treme plated bullets came with instructions to load between lead and jacketed data. I am using Bullseye with them and it seems fine for 25 yd accuracy. Have you tried looking through your loading manuals for 41 Special data?? I can't find a listing for that specific cartridge. As it turns out,...

The answer SHOULD be YES. However, back around the year 2000, EAA's lineup had LARGE frame guns and small frame guns. The large frames were 45 and 10mm, and the small frames were 40 and 9 mm. So the 40 and 10mm mags were NOT interchangeable. That being said, the general answer to your question shoul...

Ya maroon!! About the only two calibers you could use 60 MOA rings on are 338 Lapua or 50 BMG SHEESH!

So??? Did you ever get your scope problem figured out??

:picsneeded: https://www.google.com/imgres?imgurl=https%3A%2F%2Fwww.alanrhone.com%2Fimages%2Fservice-scopemounting-heights.jpg&imgrefurl=https%3A%2F%2Fwww.alanrhone.com%2Fservice-scopemounting-problems.html&docid=s3YRnvmRQDwaRM&tbnid=_N8akE1UHdC3yM%3A&...