Here is case measurements for our 416 HE target case made from our 585 HE big belted case. Ed http://www.gunownerstv.com/416heprint.jpg Here is picture of 375 HE left, 416 HE next, 416 HSM right.. http://www.gunownerstv.com/pat1.jpg Here, tentative specs, 416 HSM case...

The 12ga FH case now is in the new COTW book on last page in the wildcat section, I think page 324. They gave good credit to Rob for the idea of that case.... The model 416 HE long case in middle, hydro formed one, has case capacity of 240 gr, and the 416 HSM in picture, on the right, we fired a cas...

Guys asking about strong economical bolt gun to use for 28ga and 410 ga and 32ga with brass cases and higher pressures than plastic cases. They can use a MN bolt action, here is pic of one with our 585 case in the action.Guys can get Magtech brass cases or have RMC make them....Guys can make 32ga ca...

For 585 HE, a straight case we use 175 gr H335. Straight case real efficient, nearly 40%, probably less erosion than BMG The 405 gr 375 cal bullet that Mitch and Berger designed and he used had G7 of .560 ]Here is picture of a brake on 12ga FH with real hot loaded hollowbase lead slug, brake needed ...

Picture of fellows at Vestals Gunsmithing test firing 585 HE they built for a guy. They got 750 gr to almost 2800 from ultra short barrel, not a full load . A regular barrel would be over 2900, 14000 ft lbs with full load.. http://www.gunownerstv.com/585blast.jpg Picture of our 375 H...

Yes same case, Mitch is a neighbor. Here is picture of one of 3 buffs our guy from Canada got in Africa with our 24ga FH he did on a NEF, in 2nd picture http://www.gunownerstv.com/brianbuff.jpg http://www.gunownerstv.com/briangun.jpg Here is the neck die setup, with i...

Our friend Brian from the far north went to Africa with his 24ga FH he did in a NEF break action and got 3 nice buffs with it. Good job. Our 585HE, 700HE and the great 12ga FH are now in the new COTW book published in Oct, now out for sale, http://www.gunownerstv.com/cotw585.jpg We n...

Especially with time limit and you can't set for long time

waiting for wind to go down. Folks getting interested, I just took Mitch

over 2 more big boxes of cases to make 375s, as he got some orders

for ELR guns and case and die packages.Ed

Here is a picture of the 12ga FH brass case that Nathan Vale had Bertrams make. Next to short plastic case. http://www.gunownerstv.com/12gavale.jpg Here is a picture of our 585BB headstamp. Perfect lettering for our case as it came from production line,. http://www.gunownerst...

Fellow big bore nut, Nathan Vale in AUS, has worked with Bertram and got the run of full length 12ga From Hell cases done. Drawn 12ga long cases as strong as BMG brass with unbreakable rims. Any wanting to get some, contact Bertram at the email ----- b.bertram1@bigpond.com ...... Some more on wildca...

Here is a helix driver seal we made by cutting base from helix driver wadcup, good for fullbore roundballs that are too big to go in cup. Best one to cut off is shortest `12ga one BPI has. http://www.gunownerstv.com/helixseal.jpg Here is picture of a 585HE made on a Stiller bolt acti...

There are guys on Castboolits forum experimenting with locking on plastic bases securely on slugs. Making their own front heavy ones for smoothbores. Here is picture of our 585BB case next to long 585HE. http://www.gunownerstv.com/585bb.jpg Here is another view of the great camo job ...

Here is a Midland break action a guy is doing in 24ga FH. http://www.gunownerstv.com/midland24.jpg Here is old catalog picture of different stuff used in old days for shotgun loads. Some would be hairy in brass cases http://www.gunownerstv.com/ballshot.jpg Here is pic...

We will have arrived when we have this big bore in our back yard, Kind of a neat suppressor, http://www.gunownerstv.com/bigsuppressor.jpg Here is folder shotgun guys set up as 24ga FH. http://www.gunownerstv.com/companion24.jpg Here is another view of what we feel is ...

The style of most break actions singles aren't the greatest, that we we used for 12ga FH, 10ga FH, other caliber barrels we mono-blocked in them like .585" bore for 585HE and 24ga FH.. One that is close that we have, is the Magtech. Well the guys have found one that is super strong lockup and l...