How can I tell if powder is bad or to old to use?

A place to discuss calibers, ammunition, and reloading

How can I tell if powder is bad or to old to use?

Postby benny on Sun Feb 26, 2017 12:56 am

I bought out a friends reloading stuff, there is a lot of older powder tins that I have no idea how old they are accept these are tin containers where the same product is now in plastic containers.
I did a sniff test on then and didn't find any that had a strong oder but does that really tell if a powder is bad?

Yea I know some are going to say just throw it out, but I hate to waste it if it is still good.

Thanks
benny
 
Posts: 566 [View]
Joined: Sun Jun 22, 2008 12:39 am
Location: Coon Rapids, mn

Re: How can I tell if powder is bad or to old to use?

Postby LarryFlew on Sun Feb 26, 2017 1:43 am

IMO, and it is just that, i have purchased and used old powder just using the "smell" test. To me the bad stuff smelled acrid, the good smelled sweet and old but worked fine barely had an odor but had no bitter or acrid smell at all.

Your mileage may vary.
If you're having second thoughts you're two ahead of most Democrats
User avatar
LarryFlew
 
Posts: 5136 [View]
Joined: Fri Jun 19, 2009 7:37 am
Location: Hamburg, MN - CZ fan - Class of 66 - USAF 66-70 - NRA life since 1970

Re: How can I tell if powder is bad or to old to use?

Postby BigDog58 on Sun Feb 26, 2017 3:37 am

The only one I've found bad, was some IMR 4895 and as Larry stated, it had a very acrid smell. This particular powder also had a reddish/yellow looking powder coming off of it. It went into my yard as fertilizer.

I have a few of the old style cans (metal) of other powders and they smell, look and shoot just fine.
NRA RSO
"Never anger a man that can end you, from another zip code

If necessary to fight, I will Fight like I'm the 3rd Monkey on the ramp to Noah's Arc, and brother, it's starting to rain.
User avatar
BigDog58
 
Posts: 2680 [View]
Joined: Wed Jan 09, 2013 2:03 am
Location: Edina, MN

Re: How can I tell if powder is bad or to old to use?

Postby mmcnx2 on Sun Feb 26, 2017 3:55 am

Please consider some powders formulations have been changed over the years and thus while they remain the same number the associated load data may have changed.
User avatar
mmcnx2
 
Posts: 2208 [View]
Joined: Sun Dec 16, 2007 2:59 pm
Location: Hanover, MN

Re: How can I tell if powder is bad or to old to use?

Postby Seismic Sam on Sun Feb 26, 2017 10:08 am

The other thing to remember is that powder lasts a VERY long time once it's been loaded, which is also proof that it's VERY, VERY stable. Up until about 3 or 4 years ago, when I would go brass scrounging out at OGC, you could occasionally find recently fired RA-42 45 ACP cases. The case had the original primer in it, so the powder in that case was 70 years old. In addition, I never found and RA-42 duds, either. (RA = Rockford Arsenal)
User avatar
Seismic Sam
Gone but not forgotten
 
Posts: 5515 [View]
Joined: Fri Jul 27, 2007 1:02 pm
Location: Pass By-You, Loosianana

Re: How can I tell if powder is bad or to old to use?

Postby Randygmn on Sun Feb 26, 2017 10:19 am

Seismic Sam wrote:The other thing to remember is that powder lasts a VERY long time once it's been loaded, which is also proof that it's VERY, VERY stable. Up until about 3 or 4 years ago, when I would go brass scrounging out at OGC, you could occasionally find recently fired RA-42 45 ACP cases. The case had the original primer in it, so the powder in that case was 70 years old. In addition, I never found and RA-42 duds, either. (RA = Rockford Arsenal)


Never gave it much thought. I often hear about Vietnam era ammo being good to go,but 70 years is WWII era. Crazy to think that stuff still shoots.
Randygmn
 
Posts: 901 [View]
Joined: Sun Dec 15, 2013 3:52 pm

Re: How can I tell if powder is bad or to old to use?

Postby farmerj on Sun Feb 26, 2017 1:42 pm

Fired a lot of ww II .50 cal, .45 ACP and M2 ball.

Always went bang.
We reap what we sow. In our case, we have sown our government.
Current moon phase
User avatar
farmerj
 
Posts: 4801 [View]
Joined: Fri Aug 10, 2007 9:11 am
Location: The edge of the universe in the vertex of time on the space continuum of confusion

Re: How can I tell if powder is bad or to old to use?

Postby shooter115 on Tue Feb 28, 2017 5:37 pm

I'm loading 55gr FMJ's 5.56 rounds with pulldown powder from the Vietnam war. Shoots great! In fact there's probably more than a couple bench rest shooters out there that would lose their minds over me using Walt Bergers Thunderbid T-322 to load 5.56 ball ammo.
shooter115
 
Posts: 1734 [View]
Joined: Thu Sep 08, 2011 2:25 pm
Location: Morris, MN

Re: How can I tell if powder is bad or to old to use?

Postby Seismic Sam on Sat Mar 04, 2017 7:59 am

And on the subject of stinky powder, shooting nearly 100 grains of Retumbo in a 338 RUM is quite the odor experience. On a hot, muggy day, it smells exactly like a diaper pail full of pee soaked diapers :x :x :x :x It must have more than the usual amount of nitrogen in it or something...
User avatar
Seismic Sam
Gone but not forgotten
 
Posts: 5515 [View]
Joined: Fri Jul 27, 2007 1:02 pm
Location: Pass By-You, Loosianana

Re: How can I tell if powder is bad or to old to use?

Postby BuckKlier on Sat Mar 04, 2017 7:41 pm

I had some IMR 3031 in metal cans, that had red dust in it, I called Hodkins they told me it is unstable and get it out of the house NOW! If in doubt throw it out!
BuckKlier
 
Posts: 193 [View]
Joined: Tue Mar 30, 2010 7:51 pm


Return to Ammunition & Reloading

Who is online

Users browsing this forum: No registered users and 4 guests

cron