585HE-12ga From Hell Guy

A place to discuss calibers, ammunition, and reloading

Re: 585HE-12ga From Hell Guy

Postby Ghost on Sun Nov 24, 2019 9:50 am

That’s an impressive barrel
User avatar
Ghost
 
Posts: 8155 [View]
Joined: Wed Feb 05, 2014 8:49 pm

Re: 585HE-12ga From Hell Guy

Postby OldmanFCSA on Sun Nov 24, 2019 3:06 pm

Kenny makes great barrels - I use his barrels exclusively in my builds.

Who did the assembly work on your rifle shown above ???
OldmanFCSA
 
Posts: 2992 [View]
Joined: Sat Sep 24, 2011 9:55 pm
Location: Osceola, WI.

Re: 585HE-12ga From Hell Guy

Postby crbutler on Sun Nov 24, 2019 9:29 pm

The OP is a guy named Ed Hubel. He makes these things, although some other guys build them as well.

Personally, although I handle recoil pretty well, the idea of shooting a high speed .577 NE scares me.
crbutler
 
Posts: 1206 [View]
Joined: Tue Mar 29, 2011 8:29 pm

Re: 585HE-12ga From Hell Guy

Postby hubel585 on Wed Nov 27, 2019 5:49 pm

I just do cases, load development for start and max.... and cheap guns

on Enfields and test guns. That gun was done by the owner...

And have got 460 HSM specs setup, the impetus for that is some
asking about one and new great line of 458 bullets CEB now has.

It will hold more powder than the 416 HSM and will get
a 572 gr as fast as 416 HSM gets a 475gr.....Ed..
hubel585
 
Posts: 68 [View]
Joined: Sun May 11, 2014 7:28 pm

Re: 585HE-12ga From Hell Guy

Postby Holland&Holland on Wed Nov 27, 2019 6:33 pm

crbutler wrote:The OP is a guy named Ed Hubel. He makes these things, although some other guys build them as well.

Personally, although I handle recoil pretty well, the idea of shooting a high speed .577 NE scares me.


YOLO
User avatar
Holland&Holland
 
Posts: 9386 [View]
Joined: Mon Jan 12, 2009 9:17 am

Re: 585HE-12ga From Hell Guy

Postby hubel585 on Sat Jan 25, 2020 4:15 am

The guys that did the super accurate 416 HE did another
416 HE that has an 8" longer 42 inch K&P barrel..

Used a Stiller action and same load with 475 gr bullet, as in
first gun and and gained about 200 fps with good accuracy.
3065 fps. Tested 2 groups of 3 and less than 1/2 min moa.

And loads they used are not the highest speed loads
the cartridge is capable of....Here is print with specs for
the 416 HE reamer chamber ....Ed....

Image
hubel585
 
Posts: 68 [View]
Joined: Sun May 11, 2014 7:28 pm

Re: 585HE-12ga From Hell Guy

Postby hubel585 on Tue Feb 11, 2020 11:55 am

More about he guys that did the accurate 416 HE, they did a
416 HE that has an 8" longer 42 inch K&P barrel..

Used longer barrel and the same load with 475 gr bullet, as used
in the first gun and and gained about 200 fps with good accuracy,.
3065 fps. Tested 2 groups of 3 and less than 1/2 min moa.

And loads they used are not the highest speed loads
the cartridge is capable of....Here is picture.......Ed....


Image
hubel585
 
Posts: 68 [View]
Joined: Sun May 11, 2014 7:28 pm

Re: 585HE-12ga From Hell Guy

Postby Rotary12 on Tue Feb 11, 2020 12:02 pm

Ban him, he is just trying to sell his stuff.
Rotary12

Liberate the U.S.
Support the Constitution
Remember 19 April 1775
User avatar
Rotary12
 
Posts: 737 [View]
Joined: Sat Jun 20, 2009 12:28 pm
Location: Rosemount

Re: 585HE-12ga From Hell Guy

Postby Holland&Holland on Tue Feb 11, 2020 12:16 pm

Rotary12 wrote:Ban him, he is just trying to sell his stuff.

?????
User avatar
Holland&Holland
 
Posts: 9386 [View]
Joined: Mon Jan 12, 2009 9:17 am

Re: 585HE-12ga From Hell Guy

Postby hubel585 on Mon Jul 13, 2020 11:21 am

Away for a time, sickness..

Above guns built by others with 95% of cost spent elsewhere..
On all guns in my calibers worldwide, figures out, nearly 100%
costs elsewhere, I just get little glory, as the saying goes..

Here is print with chamber reamer specs for the
416 HSM chamber..There are 3 base sizes we have,
depending on actions used. Got reamers for all 3..
Got cases for all of them..
Our cases are public domain, so that is why I post
info and specs. To help guys do their own setups.
Manson makes reamers I use,,, Ed.
Image
hubel585
 
Posts: 68 [View]
Joined: Sun May 11, 2014 7:28 pm

Re: 585HE-12ga From Hell Guy

Postby hubel585 on Sat Jul 25, 2020 3:43 pm

Here is reamer print with chamber reamer specs for
the 460 HSM chamber .Couple guys getting set
to do 38-40 inch heavy 458 target barrels...Ed....
Image
hubel585
 
Posts: 68 [View]
Joined: Sun May 11, 2014 7:28 pm

Previous

Return to Ammunition & Reloading

Who is online

Users browsing this forum: No registered users and 1 guest

cron