MNGunTalk.com

45Badger wrote:I want a couple, I think. What would work best on a dillon 550?

That's why I got one of each. I'll let you know.

Original in case anyone wants to compare. $38.50

http://www.ebay.com/itm/140683042933?ss ... 1438.l2649

Sure beats a couple of candles!

How would these work running on DC? They look like they might work pretty well in my portable ice house.

They work fine on 12 vdc

LarryFlew wrote:They work fine on 12 vdc

Any idea on the draw? I might just be interested in a 2' rope light setup. would need about a 6' lead with alligator clips.

JJ wrote:

LarryFlew wrote:They work fine on 12 vdc

Any idea on the draw? I might just be interested in a 2' rope light setup. would need about a 6' lead with alligator clips.

I'm estimating around .008 amps per LED, minimum of 3 LED's per section so call it .03 amps or 30 mA per 3 LEDs to be safe for planning? The standard 6 LED stick light should draw 50-60 mA @ 12vDC

.08 W each on these and 60 per meter. Just short of 300 lumens per lamp. Strings are $3.50 per foot for non-waterproof and $4.50 a foot for waterproof. Alligator clips are up to you.

Very interested in your original posting, just concerned about mounting on a RCBS AmmoMasterII press, a Redding T7 press, and a RCBS RockChucker press, using only 1 powersupply and on-off micro-switches on each press, with 4 to 6 foot run between presses.

Can deliver to first Wednesday lunch next Wednesday for anyone interested.

Make it and Market it to Dillon!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

The longer version for the inside of a safe has a lot of interest from me. I'll do some measuring and send a PM to see what the cost would be.

Bringing it back in case anyone is interested after seeing the nice machined one. None until first wed lunch when i am back in town.

Back in town as of this weekend - almost missed the snow NOT. Now just doing the longer version since the square is no longer available. Still $12 plus $5 shipping and shipping will cover up to 3 of them. Also doing longer versions for whatever your use is $12 plus additional $4.00 a foot in either bright white or warm white. Shipping is the same. These are 5050 LEDs which are very bright. I also have it in 5630 which IMO is a little too bright for reloaders but would be $5 a foot and the same $12 and shipping.

Will be making first Wednesday lunch this week.

It's a great idea...and the price makes it almost silly to DIY.

When life allows me to get rolling...I'll probably try one. Won't know yet since I am going to use my office and I will be between to windows in a corner with an overhead light. Maybe for cloudy days!