***** factory ammo for .30-06?

A place to discuss calibers, ammunition, and reloading

***** factory ammo for .30-06?

Postby FJ540 on Wed Sep 14, 2011 2:30 am

I know this is going to sound drawkcab ssa, but is there such a thing as a reduced recoil .30-06 factory round?

Ya know the rifle I bought my buddy? Yeah, he's crying about his shoulder hurts when he shoots it. Waaaaaa :lol: He's 20# over me and built like a farm kid. I'm not sure exactly what ammo he got, but I'm pretty sure it's federal's cheapest offering. No clue what the bullet weight is either as I haven't seen the gun since I delivered it.

He's so humbled by the experience, he said it's not fun to shoot and wants an AR instead. :( He shouldn't be hunting deer with an AR IMO. But at any rate, right now he's only committed to keeping the savage till the end of rifle season and then intends to return it to me (which was the deal - he can't sell it). I'm hoping I can find a de-tuned load for him till we can work up some slow pushers like my retumbo-06 for the cooper.
User avatar
FJ540
 
Posts: 6834 [View]
Joined: Fri Nov 20, 2009 5:44 pm
Location: Rock Ridge

Re: P*ssy factory ammo for .30-06?

Postby Paul on Wed Sep 14, 2011 2:33 am

Warning issued for violation of profanity filter in thread title.
Paul
Moderator
 
Posts: 5879 [View]
Joined: Sun Feb 15, 2009 6:46 am

Re: ***** factory ammo for .30-06?

Postby FJ540 on Wed Sep 14, 2011 3:03 am

Then change it to wussy. :roll:
User avatar
FJ540
 
Posts: 6834 [View]
Joined: Fri Nov 20, 2009 5:44 pm
Location: Rock Ridge

Re: ***** factory ammo for .30-06?

Postby photogpat on Wed Sep 14, 2011 5:46 am

Nothing to see here. Continue swimming.
User avatar
photogpat
 
Posts: 3701 [View]
Joined: Sun Jun 06, 2010 1:01 pm
Location: Securely barricaded

Re: ***** factory ammo for .30-06?

Postby FJ540 on Wed Sep 14, 2011 5:52 am

You ever shoot it Pat?
User avatar
FJ540
 
Posts: 6834 [View]
Joined: Fri Nov 20, 2009 5:44 pm
Location: Rock Ridge

Re: ***** factory ammo for .30-06?

Postby photogpat on Wed Sep 14, 2011 6:01 am

Yes, and I have 2 boxes in the closet still -- problem is that its apparently not commercially available anymore (my bad). Federal looks to have dumped all their low recoil line.

Remington makes a similar load that I've shot also: http://is.gd/2ERn4i -- and this appears to be available. Both loads aren't much good beyond 150-200 yds -- but up to 100 its nearly indistinguishable from full power. YMMV.

ETA: I went back to full power so I could shoot more.
Last edited by photogpat on Wed Sep 14, 2011 7:28 am, edited 1 time in total.
Nothing to see here. Continue swimming.
User avatar
photogpat
 
Posts: 3701 [View]
Joined: Sun Jun 06, 2010 1:01 pm
Location: Securely barricaded

Re: ***** factory ammo for .30-06?

Postby Pinnacle on Wed Sep 14, 2011 6:49 am

Start Handloading.
REMEMBER THE BRAVE 343 - WE WILL NEVER FORGET FDNY

الصليبية كافر
Pinnacle
 
Posts: 2945 [View]
Joined: Thu Jul 26, 2007 7:57 pm
Location: East of the Mississippi WAAAAAYYYY East

Re: ***** factory ammo for .30-06?

Postby DeanC on Wed Sep 14, 2011 7:27 am

Frick - my 80lb 12 year old put 20 rds of 30-06 through his new gun 2 weeks ago and had a great time.

Have him get one of these and try again:

Image
Decrypt the points of departure and return your head slowly and you do not cancel your hair.
User avatar
DeanC
 
Posts: 8502 [View]
Joined: Thu Jul 26, 2007 8:22 am
Location: Captain Cufflinks

Re: ***** factory ammo for .30-06?

Postby Shipyard on Wed Sep 14, 2011 7:29 am

photogpat wrote:Remington makes a similar load that I've shot also: http://is.gd/2ERn4i -- and this appears to be available. Both loads aren't much good beyond 150-200 yds -- but up to 100 its nearly indistinguishable from full power. YMMV.
.



+1.. i thikn they also come with a coupon for pink socks. i'm not sayin, i'm just sayin...
i do what i can, where i'm needed, and i ask so little in return. i'm a true humanitarian fueled by rainbows and whiskey. you should be so lucky to know me...

Shipyard wrote:no kidding. that guy gets banned from here more than i quit this place :lol:
User avatar
Shipyard
 
Posts: 4276 [View]
Joined: Fri Mar 06, 2009 8:33 am
Location: Gettin' all up in it...

Re: ***** factory ammo for .30-06?

Postby photogpat on Wed Sep 14, 2011 7:43 am

Shipyard wrote:
photogpat wrote:Remington makes a similar load that I've shot also: http://is.gd/2ERn4i -- and this appears to be available. Both loads aren't much good beyond 150-200 yds -- but up to 100 its nearly indistinguishable from full power. YMMV.
.



+1.. i thikn they also come with a coupon for pink socks. i'm not sayin, i'm just sayin...


ETA: I WENT BACK TO FULL POWER....geez....
Nothing to see here. Continue swimming.
User avatar
photogpat
 
Posts: 3701 [View]
Joined: Sun Jun 06, 2010 1:01 pm
Location: Securely barricaded

Re: ***** factory ammo for .30-06?

Postby 1911fan on Wed Sep 14, 2011 7:52 am

Reduced power is a 130 grain bullet which just looses too much energy took fast for long shots. It does work well for short distances.

Three options. I have a low power -06 load in my book at home I can send you.

Buy the low recoil stuff

Post the rifle for sale and run to goose hill and buy one of the rem 700 packages they have in 7-08 for him( that would be a better choice for kiddo, too) and if buddy has issues with recoil from that, well I am sure Mrs Tim has a tutu and a tiara he can borrow.
User avatar
1911fan
 
Posts: 6545 [View]
Joined: Thu Jul 26, 2007 1:56 pm
Location: 35 W and Hwy 10

Re: ***** factory ammo for .30-06?

Postby Pinnacle on Wed Sep 14, 2011 11:22 am

I am also not a huge fan of 30-06 either - beats the heck out of me, and does not do that well for my shoulder either. I went to a 270 shooting 130gr bullets.... That seems to solve the issue for me and I absolutely defy you to distinguish the terminal effects - dead is dead.
REMEMBER THE BRAVE 343 - WE WILL NEVER FORGET FDNY

الصليبية كافر
Pinnacle
 
Posts: 2945 [View]
Joined: Thu Jul 26, 2007 7:57 pm
Location: East of the Mississippi WAAAAAYYYY East

Re: ***** factory ammo for .30-06?

Postby FJ540 on Wed Sep 14, 2011 1:34 pm

Pinnacle wrote:Start Handloading.


That was the intent from the start - he doesn't have any reloading gear and I don't have .30-06 dies or brass. The plan was that he'd get some boxes of factory through it, then buy the dies, bullets, powder, and come down to my place and I'd get him going on rolling his own. But as we all know, a plan is only good till the first encounter...

What I'll likely do is use that gun for capital conversion (sale or trade) for a .30-30 lever so kiddo and the odd-paw Mrs can shoot the same beast (and I want one). The .30-06 doesn't add anything to my stable that isn't already more than fulfilled with my .308 and .25-06.

Thanks for the insights, this is what you can't get with google, Paul. ;)
User avatar
FJ540
 
Posts: 6834 [View]
Joined: Fri Nov 20, 2009 5:44 pm
Location: Rock Ridge

Re: ***** factory ammo for .30-06?

Postby 1911fan on Wed Sep 14, 2011 1:58 pm

Moby has a nice 3030 on the board here, try that.
User avatar
1911fan
 
Posts: 6545 [View]
Joined: Thu Jul 26, 2007 1:56 pm
Location: 35 W and Hwy 10

Re: ***** factory ammo for .30-06?

Postby FJ540 on Wed Sep 14, 2011 4:01 pm

I won't have the savage back for two months.

Maybe he'll finally kill a deer and want to keep it.
User avatar
FJ540
 
Posts: 6834 [View]
Joined: Fri Nov 20, 2009 5:44 pm
Location: Rock Ridge

Next

Return to Ammunition & Reloading

Who is online

Users browsing this forum: No registered users and 11 guests

cron