JAKL Machine 80% Build Party

[Punisher102]

Jakl, IF you find yourself with an extra one, lemme know. I have another friend wanting one.

[7808]

guns and motorcycles, some of my favorite things

[jakl]

The party date is less than two weeks out now!! For those of you that are to be sending in the deposits yet - - we need your deposits by Thursday, April 18. Anything after that will not be accepted. If there are extra lowers, these will be available at the party for the current list of attendees to purchase on a first come, first serve basis.

Also - if any of you attendees plan on having a special engraving on your lower(s), please have this information to us by Thursday, April 18. We need time to program it in and to have it ready to roll. The fee for the special engraving will be able to be determined when we see what it is you want on it.

Remember - it is $50 per lower to finish the lowers to 100%. This can be paid to us the day of the party.

Please PM us with your information and/or questions.

Thanks!!

[driztan]

Very excited for this party. Look forward to meeting many of you.

[Username000]

Guess I should've found out in advance, Permit To Purchase required for this procedure?

[jshuberg]

My buddy can't make it. His lower is available for whoever puts $80 in my paws. PM me.

EDIT: Sold to Mncarbon15.

[jakl]

Hey Guys - The engraving info is rolling in. Thanks! Just a quick reminder - there are so many font styles out there - you can pick one, for example from Microsoft Word, and let us know the font name. It is just too hard to pick a font style that will suite everyone's individual choices. Thanks again!

[jshuberg]

I've contacted the anodizing company in Mpls to confirm they are still able to do a type III hard anodizing for any of those interested.

If anyone is interested in having their lower anodized, please let me know, I'd like to get a count. There is only one requirement, and that is that a serial number be located somewhere on the lower, under the grip is fine. There are no other engraving or manufacturing requirements. I'll be bringing all of them in and having them done at the same time to reduce costs.

Thanks much to jakl! I'm looking forward to this, see you all on Saturday

[jakl]

Hey Guys!

Here's the party address:

212 3rd St W, Jasper, MN 56144
Phone: 507.348.9008
my cell: 507.820.9008
Please use the east walk-in door - not the south side door. It will be marked as well.

Thanks & look forward to meeting all of you on Saturday!

[driztan]

Hey Guys!

Here's the party address:

212 3rd St W, Jasper, MN 56144
Phone: 507.348.9008
my cell: 507.820.9008
Please use the east walk-in door - not the south side door. It will be marked as well.

Thanks & look forward to meeting all of you on Saturday!

And the door mentioned above opens at 0900?

[Mncarbon15]

Hey Guys!

Here's the party address:

212 3rd St W, Jasper, MN 56144
Phone: 507.348.9008
my cell: 507.820.9008
Please use the east walk-in door - not the south side door. It will be marked as well.

Thanks & look forward to meeting all of you on Saturday!

Thanks for posting your address. I was going to ask but then I did search and got what I think was your address.I'm sure it is the same but I feel better getting it from you.

[Punisher102]

I've contacted the anodizing company in Mpls to confirm they are still able to do a type III hard anodizing for any of those interested.

If anyone is interested in having their lower anodized, please let me know, I'd like to get a count. There is only one requirement, and that is that a serial number be located somewhere on the lower, under the grip is fine. There are no other engraving or manufacturing requirements. I'll be bringing all of them in and having them done at the same time to reduce costs.

Thanks much to jakl! I'm looking forward to this, see you all on Saturday

Ive been kicking around the idea of cerakoating mine. This way I can blast the top and get both finished the same. BUT if I should change my mine, in lieu of a serial number, would personal engraving count? And if so, what is the cost on the anodizing?

[jshuberg]

The cost is per tank, and how ever many lowers fit in the tank at the same time, the cost per lower goes down. When I get a proper head count I'll get the actual price per lower.

[jakl]

Yes, the doors open at 9am. It is suppose to be 70 degrees here that day. Our plan is to have some picnic tables set up outside and you might find some free food - wink,wink...... There is not a set machining schedule - it will be on a first come, first serve basis. If everyone shows up at the same time, there will be waiting and down-time going on until everyone gets their turn. Oh - the only cell phone service that works 100% in Jasper is ATT. Other providers have so-so coverage here - depends on the day, weather, air traffic...all of those good things... LOL . The town is in one of those bad areas that isn't covered by all of the cell providers/towers yet.

Just an idea to break-up the long drive........an area gun shop worth stopping by is http://kjergaardsports.com/ - Kjergaard Sports address is:

1951 200th Avenue
Lake Benton, MN 56149
N 44 20 6 ~ W 96 15 51
View Interactive Map

Phone // 507-368-4696
Email // Contact Us

Hours:
Mo - Sa // 9:00 AM - 8:00 PM
Sunday // 1:00 PM - 8:00 PM



See you all on Saturday!

Hey Guys!

Here's the party address:

212 3rd St W, Jasper, MN 56144
Phone: 507.348.9008
my cell: 507.820.9008
Please use the east walk-in door - not the south side door. It will be marked as well.

Thanks & look forward to meeting all of you on Saturday!

And the door mentioned above opens at 0900?

[wasfuzz]

If anyone is interested I plan on getting onto I90 at Blue Earth around 7am Sat. If you want to meet and carpool let me know. I have room for 2.