Decent range trip...

Gun related chat that doesn't fit in another forum

Decent range trip...

Postby Rodentman on Sun May 19, 2013 8:39 am

Went to BPR yesterday with a co-worker and his BIL. Brought the 2 22's since I had swapped scopes in order to effectively use the 2 part slide stop mod on the MKIII. More on that later.

Image

Image

And we ran some rounds through the Coonan, not evough to perform the presecribed "Break-in" but it ran fine so I don't know what I need to "break-in." Ran several loads all with 158g bullets and only 1 stovepipe, when my friend waws shooting. Nice load was 13.5g 2400, which I know isn't pushing the envelope at all. But it was fun and a smooth shooter. Easy takedown for cleaning.

Tested a few 45 Super loads for the 625JM. All worked fine, as I expected. Still it's always nice to see a new project work out. That's gonna be a fun round.

Also brought the 500 mag with my pansy loads of 10g Trail Boss with 300g lead. Did shoot some with 40g Lil Gun with 300g FTX. When my friend fired one, we saw a spark from overhead, from the target carrier motor housing. I immediately inspected the cylinder to see if there was some kind of failure. I KNOW my friend didn't shoot the round vertically into the housing. We're not that bad. Turns out the concussion blew the breaker in the device, Roger took care of it was not upset with us, which made me happy.

I still don't like the re-assembly of the MKIII even with the two part bolt stop. I unscrew the top colt piece, remove the bolt, but after re-assembly it will not pull out all the way. I have to repeatedly reassemble it until I get it right but I don't know what I am doing wrong and what causes this.

Anyway the trip was a success!
User avatar
Rodentman
 
Posts: 2740 [View]
Joined: Sat Feb 07, 2009 9:22 am

Re: Decent range trip...

Postby XDM45 on Sun May 19, 2013 9:48 am

Sounds like a good time. We should go sometime. I know your MKIII is now modified (as is mine), but we've both modified them differently, so while it's not exactly the same, I could show you some reassembly tips which may still be applicable to your setup.
Gnothi Seauton
User avatar
XDM45
 
Posts: 2904 [View]
Joined: Fri Mar 09, 2012 8:01 am
Location: Minneapolis/Saint Paul, MN

Re: Decent range trip...

Postby brewerbob on Sun May 19, 2013 1:58 pm

Had a productive day today as well. Groupings improved for both son and me after viewing magpul video and some personal instruction. Also found that son get excited about hitting target dead center, relaxes and throws a flyer. Kept his concentration today and improved. Will be getting a glock 22 for myself in a month or so. Felt good in my hands. The 23 I currently use is just a tad small.

Rossi rio grande (45-70) shoots high after three rounds and the barrel gets hot. Got some good data with hornady 325gr ftx. Need to get out to a longer range.
brewerbob
 
Posts: 121 [View]
Joined: Sat Sep 29, 2012 9:25 am


Return to General Gun Chat

Who is online

Users browsing this forum: No registered users and 8 guests

cron