by PHATSPEED7x on Tue Jun 24, 2014 9:32 pm
Ok guys I need some help...
I got some new magazines in the mail today from Midway USA. They are the C Products Defense line. I was given a 10 round magazine with the rifle. Loads all 10 rounds just fine. The second one will only hold 9. The 25 round model side walls are so thin it seems like with only 5 rounds in it budges to the point where I can't insert it into the magazine well without forcing it. And takes equal amount of effort to get it out as well. So I've ruled the two magazines I got are junk. Will be contacting C Products to see if I can get replacements sent out.
Also another thing I tried tonight was to chamber a round into the gun tonight with the 10 round magazine with 10 rounds loaded. Wouldn't go into battery. Had to use the forward assist, and every once in awhile that wouldn't even do it. The gun will only chamber a round fully when there is only 1 round in the magazine. Then I pull the charging handle to eject the round and it gets hung up. Now I understand this all happens alot faster and with more force when the gun is being fired. But I would think I could get it to do the simple operations with just my hand... My Armalite M15A4 does it just fine. I've lubed the crap out of the bolt, carrier, and made sure the chamber was clean, and free of junk. This rifle has never been fired to my knowledge. I also noticed the upper receiver doesn't have M4 style cut outs for the feed ramps. Wondering how this will affect how the rifle runs...
Any ideas? Again I know I can't condemn anything since I haven't shot it yet. I double checked the upper build, and everything seems to be put together correctly, and torqued to spec.
"Amateurs train until they get it right... Professionals train until they get it wrong"