MNGunTalk.com

I guess it is kinda late to ask since I have ordered and it is on it's way. But is anyone here familiar with the 6.8 SPC on an AR platform?

I would search this one, otherwise you are going to open Pandoras big, dirty, opinionated box. However I do know a TON of people who hunt with this caliber.

I'm on my second one (first one was a Model 1 upper, this one is an LWRC M6A3). Shoots great, but haven't gone hunting with it—yet. I dabbled with reloading about 200 rounds a few years back, and having NEVER reloaded before, it turned out better than factory. Just be ready to spend a lot of money on ammo, and get on Silver State Armory's email list so you can get their factory 2nds when they come out.

dshortone wrote:......get on Silver State Armory's email list so you can get their factory 2nds when they come out.

Thanks!

A buddy has a Noveske that shoots nice. Check out the 6.8 forum, lots of info there.

I hunt with an ar in 6.8. I'd be happy to answer any questions you may have.

Have a Minni-14 in 6.8. Love it, still working on my optics preferences but plan on hunting with it next fall. It is one of my favorites to shoot fwiw.

Holland&Holland wrote:Have a Minni-14 in 6.8. Love it, still working on my optics preferences but plan on hunting with it next fall. It is one of my favorites to shoot fwiw.

I have heard that the Ruger Mini 14 in the 6.8 SPC has been very accurate because of some of the changes that Ruger did compared to their .223. So have you gotten enough trigger time on your Ruger 6.8 to substantiate this?

cobb wrote:

Holland&Holland wrote:Have a Minni-14 in 6.8. Love it, still working on my optics preferences but plan on hunting with it next fall. It is one of my favorites to shoot fwiw.

I have heard that the Ruger Mini 14 in the 6.8 SPC has been very accurate because of some of the changes that Ruger did compared to their .223. So have you gotten enough trigger time on your Ruger 6.8 to substantiate this?

I would tentitivley say so, though ask me again in a couple months. Intended for my 12 year old to use it for deer season this year. Was getting decent groups when sighting it in but went with a cheap tacti-cool optic, kind of a long story, sorry. Had an optic I wanted to use on it that I had decided not to use on another gun but had a specialty ring so the ruger rings where no good. Bought an adapter rail that worked with ruger, scope eye releif was not workable for my youngster (was fine for me but not for him). found this cheap tacti-cool model that worked on a rail (but did not have any sort of cross bolt peice). Sighted it in. I was just not happy with the mounting as it seemed like there were too many screws and too many parts if you know what I mean but I was able to get quarter size groups at 100 yards so I was thinking good to go. Handed it to the youngster, he was about 3 -4 inch groups. Deer huntable and figured it was youth (though I should have known something was up as he is usually the better shot between my two boys). Was using Hornady match which is a hollow point and what cabella's reccomended for deer though I was not quite trusting that either. Then Hornaday came out with their SST load. I emailed Hornady and they reccomended not using the Match as they do not test it for expansion, so ordered a few boxes of the sst in. Ran to Oakdale to adjust it to the new load. Noticed that the scope seemed to be mounted a bit forward from where I thought I would have mounted it, considering the eye releif issues with the youngster I thought, huh, why did I not mount that farther back? Then it hit me, did it move? Nah, couldn't have. Grabbed some lock tite, remounted it farther back, sighted it in. Nice tight groups, good to go!, Ah, what the heck, lets see what kind of 5 shot group I can get to post on MNguntalk and brag about. Shot it, went down to check, well that group sucked. And you guessed it, went back and looked at my scope, crap, it moved, I am sure of it. So marked it, shot a coule more rounds and yep, was moving forward now at a very obvious 1/8 inch with each shot. Ok, that is not going to work. Did not have time to address before the season, so I switched guns around and left it home. I have since taked that optic off and have a leopold VX2 on back order at Cabelas. So sorry for the long winded response but let me get that scope mounted and verify for sure, but I am very confident that it will be my deer gun this next fall.

All that saide, have shot it with the open sights and can tend to get 2 inch groups at 100 which with open sights are about as good as I get.

I have a Barret AR in 6.8. One of the most accurate AR's I have ever shot.

The caliber is good for deer and feral hogs, especially with an accubond bullet. Reloading is really pretty straightforward with it.

The only real issue is which of the chamberings you have it in. They made a modified chamber a while after the round came out. Not an issue that I have, since mine was made before they came up with the minor modifications, and I only have the one gun, but it can play an issue if you have multiple guns and the ammo is not compatible with both (ie pressure issues...)

cobb wrote:I guess it is kinda late to ask since I have ordered and it is on it's way. But is anyone here familiar with the 6.8 SPC on an AR platform?

What did you end up ordering?

dshortone wrote:

cobb wrote:I guess it is kinda late to ask since I have ordered and it is on it's way. But is anyone here familiar with the 6.8 SPC on an AR platform?

What did you end up ordering?

Stag Arms model 7 Hunter.

Make sure you get the Spec II or Tactical loads! With that longer barrel and the higher velocity of the hotter loads, you've got a VERY nice hunting rifle.

-
Here it is just put together on my bench.



Stag Arms model 7 in 6.8 SPC with a Burris Six-X scope which is a 2X-12X with a 30mm tube mounted in a Burris AR PEPR.

Now to get to the range an see what is possible. I have heard nothing but good about the Stag Arms in 6.8 and accuracy. I have some factory fodder to play with, but plan to shoot a few possible handloads. Maybe for deer hunting either the Nosler 110gr Accubond or the Barnes 95gr SSTX and for coyotes maybe the Speer 90gr TNT or even again the Barnes 95gr SSTX.

Sweet! It'll be fun to hear what she'll do at the range.