BCG question

Discussion of rifles, shotguns, and muzzleloaders

Re: BCG question

Postby Bearcatrp on Fri Feb 02, 2018 12:22 pm

Looks good. will be getting some. Am assuming to run the sonic cleaner hot with this stuff?
Bearcatrp
 
Posts: 3043 [View]
Joined: Sun Mar 16, 2014 7:57 pm

Re: BCG question

Postby Ghost on Fri Feb 02, 2018 1:13 pm

Bearcatrp wrote:Looks good. will be getting some. Am assuming to run the sonic cleaner hot with this stuff?

The stuff I recommended doesn’t need a sonic cleaner. Soak it and everything should wipe off.

How should I use Carbon Killer?
Carbon Killer was designed for soaking heavily carboned internal steel parts (AR bolt, revolver cylinders, firing pins). Pour Carbon Killer into a small glass or steel tray and place carboned parts inside. This allows for easy removal of parts after cleaning. You can also saturate a patch of rag and place on area you need to clean but soaking parts is far more effective.
User avatar
Ghost
 
Posts: 8246 [View]
Joined: Wed Feb 05, 2014 8:49 pm

Re: BCG question

Postby BigDog58 on Sat Feb 03, 2018 12:03 am

Have any of you used this Slip-2000 for carbon removal on a rifle brake? I've been looking for a good solution for removing hard carbon deposits on my 50 Cal Tank Brake. I've tried a couple of products with my sonic cleaner, but not had much success.

Also, could this cleaner be used to remove carbon in a rifle's chamber? I am looking for a way to remove this carbon, between days at a match. I shoot Solid Brass projectiles, and brass/copper fouling doesn't seem to be the bigger issue (I also don't want to have to "foul" the barrel after copper/brass removal at a match), but with the slower powders I shoot, carbon fouling seems to be an issue.
NRA RSO
"Never anger a man that can end you, from another zip code

If necessary to fight, I will Fight like I'm the 3rd Monkey on the ramp to Noah's Arc, and brother, it's starting to rain.
User avatar
BigDog58
 
Posts: 2680 [View]
Joined: Wed Jan 09, 2013 2:03 am
Location: Edina, MN

Re: BCG question

Postby Holland&Holland on Sat Feb 03, 2018 12:10 am

What is wrong with hoppes 9?
User avatar
Holland&Holland
 
Posts: 12615 [View]
Joined: Mon Jan 12, 2009 9:17 am

Re: BCG question

Postby Ghost on Sat Feb 03, 2018 12:17 am

BigDog58 wrote:Have any of you used this Slip-2000 for carbon removal on a rifle brake? I've been looking for a good solution for removing hard carbon deposits on my 50 Cal Tank Brake. I've tried a couple of products with my sonic cleaner, but not had much success.

Also, could this cleaner be used to remove carbon in a rifle's chamber? I am looking for a way to remove this carbon, between days at a match. I shoot Solid Brass projectiles, and brass/copper fouling doesn't seem to be the bigger issue (I also don't want to have to "foul" the barrel after copper/brass removal at a match), but with the slower powders I shoot, carbon fouling seems to be an issue.

Worth a try. I’ve thrown 1911 barrels and revolver cylinders in it and they come out clean after patches and a wipe down.

User avatar
Ghost
 
Posts: 8246 [View]
Joined: Wed Feb 05, 2014 8:49 pm

Re: BCG question

Postby Randygmn on Sat Feb 03, 2018 11:07 am

Just go buy a CAT tool designed to scrape carbon off the bolt and carrier. Should be $10
Randygmn
 
Posts: 901 [View]
Joined: Sun Dec 15, 2013 3:52 pm

Re: BCG question

Postby photogpat on Sat Feb 03, 2018 3:03 pm

Kroil and a green 3M dish pad. Not even kidding. Let the Kroil soak for a minute or two, and the carbon wipes off with the pad.

Best tip I got out of an armorer's class.
Nothing to see here. Continue swimming.
User avatar
photogpat
 
Posts: 3701 [View]
Joined: Sun Jun 06, 2010 1:01 pm
Location: Securely barricaded

Re: BCG question

Postby Holland&Holland on Thu Feb 08, 2018 11:22 am

photogpat wrote:Kroil and a green 3M dish pad. Not even kidding. Let the Kroil soak for a minute or two, and the carbon wipes off with the pad.

Best tip I got out of an armorer's class.


I will have to give that a try.
User avatar
Holland&Holland
 
Posts: 12615 [View]
Joined: Mon Jan 12, 2009 9:17 am

Re: BCG question

Postby yukonjasper on Thu Feb 08, 2018 12:48 pm

Picked up a bottle of the Carbon Killer. I hope I can shoot enough to really need it. Thanks for the tip.
Deo Adjuvante Non Timendum - (with the help of God there is nothing to be afraid of)
Spectamur Agendo - (We are proven by our actions)
Non Ducor, Duco - (I am not led, I lead)
NRA Life Member
User avatar
yukonjasper
 
Posts: 5823 [View]
Joined: Wed Feb 06, 2008 3:31 pm
Location: eagan

Re: BCG question

Postby Bearcatrp on Fri Feb 09, 2018 8:41 pm

Picked up a bottle of carbon killer today. Will be trying it soon.
Bearcatrp
 
Posts: 3043 [View]
Joined: Sun Mar 16, 2014 7:57 pm

Re: BCG question

Postby Holland&Holland on Sun Feb 11, 2018 7:33 am

photogpat wrote:Kroil and a green 3M dish pad. Not even kidding. Let the Kroil soak for a minute or two, and the carbon wipes off with the pad.

Best tip I got out of an armorer's class.

Which kind of dish pad? The scratchier kind or the plasticy kind
User avatar
Holland&Holland
 
Posts: 12615 [View]
Joined: Mon Jan 12, 2009 9:17 am

Re: BCG question

Postby Bearcatrp on Tue Feb 13, 2018 12:36 pm

Soaked it for about 2 hours. This about right for cleaning?
Image
Bearcatrp
 
Posts: 3043 [View]
Joined: Sun Mar 16, 2014 7:57 pm

Re: BCG question

Postby Ghost on Tue Feb 13, 2018 1:25 pm

Bearcatrp wrote:Soaked it for about 2 hours. This about right for cleaning?
Image

Mine has always wiped clean. You may have to take a toothbrush or something to that. I’ve cleaned bolts that had thousands of rounds over years and they looked better.
User avatar
Ghost
 
Posts: 8246 [View]
Joined: Wed Feb 05, 2014 8:49 pm

Re: BCG question

Postby hard h2o on Wed Feb 14, 2018 12:04 pm

Ghost wrote:You may have to take a toothbrush or something to that.


Better yet. Something like this:

https://www.hoppes.com/cleaning-accessories/utility-brush
hard h2o
 
Posts: 745 [View]
Joined: Mon Oct 17, 2011 1:08 pm
Location: Oakdale, MN

Re: BCG question

Postby Bearcatrp on Wed Feb 14, 2018 9:37 pm

hard h2o wrote:
Ghost wrote:You may have to take a toothbrush or something to that.


Better yet. Something like this:

https://www.hoppes.com/cleaning-accessories/utility-brush

I have that brush so will give it a shot after I clean it from the range today. It was just gorgeous out shooting today. Am ready for spring!
Bearcatrp
 
Posts: 3043 [View]
Joined: Sun Mar 16, 2014 7:57 pm

PreviousNext

Return to Long Guns

Who is online

Users browsing this forum: No registered users and 6 guests

cron