Evil Black Rifle photo thread

[Keith]

Crappy cell phone pic but here's my most unique one. It was a little temperamental at first but I received a bad mag block with the upper. Ever since they replaced it it has run great even with the 1950's ammo.
7.62x25 Tokarev DI upper.
DPMS .223 lower with a mag block for the PPS 43 mags. I have to cut a notch in the mags for the AR mag catch.
Spikes battle trigger. I was getting some light strikes with the JP trigger on the surplus ammo.
Primary Arms red dot.
I bought all the surplus ammo I could when it was available and am sitting on 11,000+ rounds of cheap ammo for it.

[engnerdan]

Crappy cell phone pic but here's my most unique one. It was a little temperamental at first but I received a bad mag block with the upper. Ever since they replaced it it has run great even with the 1950's ammo.
7.62x25 Tokarev DI upper.
DPMS .223 lower with a mag block for the PPS 43 mags. I have to cut a notch in the mags for the AR mag catch.
Spikes battle trigger. I was getting some light strikes with the JP trigger on the surplus ammo.
Primary Arms red dot.
I bought all the surplus ammo I could when it was available and am sitting on 11,000+ rounds of cheap ammo for it.

I was just looking at one of these rounds and comparing it to a 300 blackout case last night. I was thinking a 300 blackout loaded with a 30 carbine bullet (short round nose) would be a unique little round.

[westberg]

Most definitely not fancy, but a work in progress.

Armalite M-15 Lower & Upper M4 profile
Mid-length gas system
1:7 Heavy Barrel
Magpul MOE Handguard
Blackhawk Mag Pouch and vert foregrip
Weaver Red/Green Dot sight

Magpul buttstock and pistol grip are on order as is a Blackhawk Storm Sling and single point adapter.

ar-006.jpg

photogpat, is your Weaver sight backwards?

[Keith]

Crappy cell phone pic but here's my most unique one. It was a little temperamental at first but I received a bad mag block with the upper. Ever since they replaced it it has run great even with the 1950's ammo.
7.62x25 Tokarev DI upper.
DPMS .223 lower with a mag block for the PPS 43 mags. I have to cut a notch in the mags for the AR mag catch.
Spikes battle trigger. I was getting some light strikes with the JP trigger on the surplus ammo.
Primary Arms red dot.
I bought all the surplus ammo I could when it was available and am sitting on 11,000+ rounds of cheap ammo for it.

I was just looking at one of these rounds and comparing it to a 300 blackout case last night. I was thinking a 300 blackout loaded with a 30 carbine bullet (short round nose) would be a unique little round.

A handful of guys are putting .308 bullets in tokarev cases for suppressors.

[photogpat]

Most definitely not fancy, but a work in progress.

Armalite M-15 Lower & Upper M4 profile
Mid-length gas system
1:7 Heavy Barrel
Magpul MOE Handguard
Blackhawk Mag Pouch and vert foregrip
Weaver Red/Green Dot sight

Magpul buttstock and pistol grip are on order as is a Blackhawk Storm Sling and single point adapter.

ar-006.jpg

photogpat, is your Weaver sight backwards?

Nope...the rear is a rubber eyepiece and the front is a screw on sunshade.

http://www.weaveroptics.com/optics/red_green_dot/

[Scratch]

It's about time there's an AR picture thread on here...
Here's my contributions:
16" SS PSA mid length upper on a PSA lower with a reworked trigger. Still looking for a HG I like...


24" DPMS SS bull barrel, RRA bolt and carrier, YHM Todd Jarret handguard, PRS stock, Panther grip, Osprey scope.

[BC98]

12.5" Centurion Arms barrel, DD MFR 12.0 rail, Troy front & rear irons, Weaver Tactical 1-5x optic (not pictured), Spike's SBR'ed lower, VLTOR A5 buffer system, and Magpul ACS-L stock


Same lower but a mongrel 300 BLK upper build with a Delta Company Arms 9" barrel and DD Omega 9.0

[Meta-Prometheus]

Colt LE6920 w/ DD Omega 7, BFG Padded VCAS, Magpul CTR, Magpul MOE, Magpul Enhanced Trigger Guard, LaRue BUIS, BCM Gunfighter CH Mod 4

[ScatterGun4015]

Colt LE6920 w/ DD Omega 7, BFG Padded VCAS, Magpul CTR, Magpul MOE, Magpul Enhanced Trigger Guard, LaRue BUIS, BCM Gunfighter CH Mod 4

I see a tactical beverage entry tool in that there picture.......nice

BTW......maybe we should organize an all black rifle shoot........that would be fun

[bpacman]

I do luv the Gun Porn!!!



The one in the back (AKA Ken):
PSA Lower with Bill Springfield LPK
Magpul PRS Stock
RRA 20" SS A4 1/8 barrel with RRA Half Quad Forearm
POS Barska Scope acting as a place holder for my Vortex or Weaver scope to be ordered this month.

Front AR15 (AKA Barbie)

S&W M&P15OR
MI BUIS made for S&W
Noname quad rail forearm
Bill Springfield 4# Trigger Job
EOtech 512
Recently added a Burris AR Tripler.

Pair of SA Loaded 1911s (Bonnie and Clyde)

Kershaw 1670BRNZDP composite Blur ZDP189 (my favorite pocket knife).

BP

[nframe]

FN FAL Imbel Reciever,South African Butt stock, Weaver 2-10x50. This is what they cal a frankenfal on another forum.

[TTS]

It looks a little diffrent now, but this is the most recent photo I have.

[plblark]

http://www.ar15.com/forums/t_1_5/130360 ... tml&page=2

[Scratch]

http://www.ar15.com/forums/t_1_5/1303607_Steampunk_AR__.html&page=2

That's going to be a cool thread! I can't wait to see the results!

[gunforhire]

I am just getting started, but here is what I got so far



DSA 16" bbl 1n9 twist
YHM lopro gas block
Midwest 12" gen 2 ss handguard in FDE
RRA upper and BCG

To be assembled

Surplus ammo and arms Grim Reaper lower
RRA lpk
FDE RRA operator Stock
FDE Houge grip
NIKON M223 2-8x32 with nikoplx reticle and killflash on RRA mounts
Specter gear sling