lost post

[Seismic Sam]

If it was me, that would have been my 9x25 SSX Wildcat. ( SSX = Seismic Sam Xpress ) You start with 6.8 SPC rifle brass, cut it down to length, then ream the case mouth to give a .011" thickness, and do a final form with a 9x25 Dillon size die. The 6.8 SPC is good for 55,000 PSI, and with Hornady 90 grain 9mm JHP bullets, I was able to get muzzle velocities of 2170 FPS. The muzzle blast and flame pattern was truly epic. Unfortunately, what was really needed was an EAA 6" bbl 10mm hunter pistol, and I couldn't see spending any more money on the project.