LF recommendation for Glock Armorer near Wadena or Baxter
Posted: Fri May 31, 2019 9:25 pmMy G17 seems be having A FTB now an then.
MNGunTalk.com
LF recommendation for Glock Armorer near Wadena or Baxter
Page 1 of 2
Posted: Fri May 31, 2019 9:25 pmRe: LF recommendation for Glock Armorer near Wadena or Baxter
Posted: Sat Jun 01, 2019 9:33 pmBrian at Brian's Welding/ Pointblank GunTraining in Brainerd is a Glock armorer.
Re: LF recommendation for Glock Armorer near Wadena or Baxter
Posted: Sun Jun 02, 2019 4:46 amDave Timm in Baxter is also quite skilled.
Re: LF recommendation for Glock Armorer near Wadena or Baxter
Posted: Sun Jun 02, 2019 5:18 amHmac wrote:Dave Timm in Baxter is also quite skilled.
I know him, he was a FFL for a rifle I ordered.
TY you both I have two places to start!
Re: LF recommendation for Glock Armorer near Wadena or Baxter
Posted: Sun Jun 02, 2019 8:50 amWhat is FTB?
Re: LF recommendation for Glock Armorer near Wadena or Baxter
Posted: Sun Jun 02, 2019 10:23 amDave Timm would be the guy to take it to for repair.
Re: LF recommendation for Glock Armorer near Wadena or Baxter
Posted: Sun Jun 02, 2019 5:55 pmusnret wrote:What is FTB?
Failure to Battery.
Re: LF recommendation for Glock Armorer near Wadena or Baxter
Posted: Sun Jun 02, 2019 9:55 pmAre you shooting factory or reloads? If you are shooting factory, I would suggest installing a new recoil spring assembly.
Re: LF recommendation for Glock Armorer near Wadena or Baxter
Posted: Sun Jun 02, 2019 10:08 pmusnret wrote:Are you shooting factory or reloads? If you are shooting factory, I would suggest installing a new recoil spring assembly.
Factory, tho the slide seems to catch on closing.
I am going to reclean it again maybe I missed something, the factory tritium sights are getting dim so I may get them replaced as well.
Re: LF recommendation for Glock Armorer near Wadena or Baxter
Posted: Mon Jun 03, 2019 10:24 pmIs the slide hanging up under full spring power or are is it hanging up when you hand ride the slide? In other words easing the slide forward with your hand.
Re: LF recommendation for Glock Armorer near Wadena or Baxter
Posted: Mon Jun 03, 2019 10:33 pmusnret wrote:Is the slide hanging up under full spring power or are is it hanging up when you hand ride the slide? In other words easing the slide forward with your hand.
Easing forward, tho the FtB is firing using white box or something. The Glock is old 15 years or so (now I am feeling old again) but has less than 3,000 rounds fired.
Re: LF recommendation for Glock Armorer near Wadena or Baxter
Posted: Tue Jun 04, 2019 7:45 amIt's normal to feel the hangup when riding the slide. You need to replace the recoil spring for the problem when firing. You can get recoil springs from the Glock web site store for $5.00. Brownell, and MudwayUSA have them for like $7.50.
Re: LF recommendation for Glock Armorer near Wadena or Baxter
Posted: Tue Jun 04, 2019 8:47 amusnret wrote:It's normal to feel the hangup when riding the slide. You need to replace the recoil spring for the problem when firing. You can get recoil springs from the Glock web site store for $5.00. Brownell, and MudwayUSA have them for like $7.50.
Ok Thank You!
I think I will order one just in case, I should probably replace the magazine springs too.
LF recommendation for Glock Armorer near Wadena or Baxter
Posted: Tue Jun 04, 2019 4:06 pmInteresting. Seems like an easy fix. I have a G17 but has no where near that round count but I’ll watch for this issue.
On the subject of G17s, what does everyone think of that CAA MCK micro conversion kit? Novelty, fun toy, or both?
Sent from my iPhone using Tapatalk
On the subject of G17s, what does everyone think of that CAA MCK micro conversion kit? Novelty, fun toy, or both?
Sent from my iPhone using Tapatalk
Re: LF recommendation for Glock Armorer near Wadena or Baxter
Posted: Tue Jun 04, 2019 7:40 pmLooks cool and expensive.