cobb wrote:I thought Winchester fixed some of these problems. Several years ago shooters using Winchester White Box in Faribault IDPA matches ha failure to fire, seemed to be more with the .45 acp than the 9mm. I know one shooter seemed to have more problems than others in his H&K in .45 acp, usually a second pull of the trigger fired the round, but not always. He switched to MagTech and never had a that problem again.
Seismic Sam wrote:In case of misfires with a semi-auto (pistol or rifle) you always want to clean the gun and pull the firing pin out of the bolt/slide, and make sure there's no gunk or scraped off primer metal that's partially blocking the pin. If all the firing pin strikes look identical, then that's not the problem, but if some of them look lighter than others then you need to check the firing pin and the channel it's in.
chopper wrote:A few years ago they had failures because the flash hole was not punched and it also caused jams because the primer would back out I think those were 9mm and 40cal...
Return to Ammunition & Reloading
Users browsing this forum: No registered users and 9 guests