300 Black out owners! Alert!

Gun related chat that doesn't fit in another forum

300 Black out owners! Alert!

Postby BuckKlier on Mon Jul 30, 2018 9:17 pm

New bullet design!

30 cal.120 GRAIN OPEN TIP (HP) MATCH! Fire formed into .223/5.56.


This is what happens when you have 2 AR15 rifles that look the same, but one is 5.56 and the other is 300 Black out, and you mix them up! Blew the mag out of the lower and shell out of the bottom of the mag. The bullet was about 1-1/2" from the muzzle, and I was able to push it out with a cleaning rod. The upper is junk, Bolt broken, bolt carrier splintered, upper receiver split open I don't know about the lower yet. Other than a small cut on my lower lip I am unhurt! It must have pushed the bullet back into the case, because the bolt closed with no problem.

DSCF1929.JPG

20180727_144902.jpg

IMAG0026.JPG

IMAG0019.JPG
BuckKlier
 
Posts: 193 [View]
Joined: Tue Mar 30, 2010 7:51 pm

Re: 300 Black out owners! Alert!

Postby Jackpine Savage on Tue Jul 31, 2018 5:21 am

Yikes, glad you're OK.

I just finished a 300 build. I'm going to order some off those magazine bands that say 300 Blackout!
"I'll just store it at my place in Arizona. :lol:" - Markemp - 2/18/24 (referring to his M1A if it should be banned in MN)
User avatar
Jackpine Savage
 
Posts: 1790 [View]
Joined: Sat Feb 09, 2008 8:45 am
Location: west central MN

Re: 300 Black out owners! Alert!

Postby Scratch on Tue Jul 31, 2018 6:01 am

Yikes, glad you're ok!
01 FFL in Hudson Wisconsin
User avatar
Scratch
 
Posts: 2158 [View]
Joined: Sat Feb 12, 2011 3:23 pm
Location: Hudson, WI

Re: 300 Black out owners! Alert!

Postby BigBlue on Tue Jul 31, 2018 6:53 am

How does a .300 BLK cartridge chamber in a .223 gun? Wouldn't the cartridge fail to go into the chamber by quite a bit (3/4"?) because the bullet is too large for the end of the .223 chamber? I'd think that would prevent the gun from firing because the bolt wouldn't be in battery.

BB
BigBlue
 
Posts: 2233 [View]
Joined: Fri Oct 23, 2009 9:33 pm

Re: 300 Black out owners! Alert!

Postby Jackpine Savage on Tue Jul 31, 2018 7:11 am

BigBlue wrote:How does a .300 BLK cartridge chamber in a .223 gun? Wouldn't the cartridge fail to go into the chamber by quite a bit (3/4"?) because the bullet is too large for the end of the .223 chamber? I'd think that would prevent the gun from firing because the bolt wouldn't be in battery.

BB


The brass gets shortened to make Blackout. They will chamber, there have been quite a few kabooms.
"I'll just store it at my place in Arizona. :lol:" - Markemp - 2/18/24 (referring to his M1A if it should be banned in MN)
User avatar
Jackpine Savage
 
Posts: 1790 [View]
Joined: Sat Feb 09, 2008 8:45 am
Location: west central MN

Re: 300 Black out owners! Alert!

Postby BigBlue on Tue Jul 31, 2018 8:10 am

Jackpine Savage wrote:The brass gets shortened to make Blackout. They will chamber, there have been quite a few kabooms.


Weird. Sure looks to me like the width of the bullet on the .300 would make it too wide to fully chamber in a .223 chamber. Right where the .223 necks down the .300 is much wider. I guess that must not be the case, but it doesn't seem like it would be possible.

Image
BigBlue
 
Posts: 2233 [View]
Joined: Fri Oct 23, 2009 9:33 pm

Re: 300 Black out owners! Alert!

Postby BuckKlier on Tue Jul 31, 2018 8:21 am

BigBlue wrote:
Jackpine Savage wrote:The brass gets shortened to make Blackout. They will chamber, there have been quite a few kabooms.


Weird. Sure looks to me like the width of the bullet on the .300 would make it too wide to fully chamber in a .223 chamber. Right where the .223 necks down the .300 is much wider. I guess that must not be the case, but it doesn't seem like it would be possible.

Image


When the Bolt slams shut it pushes the bullet deeper into the case. this was a factory load (Remington) with not much cantalure on the bullet and little to no crimp.
BuckKlier
 
Posts: 193 [View]
Joined: Tue Mar 30, 2010 7:51 pm

Re: 300 Black out owners! Alert!

Postby Erud on Tue Jul 31, 2018 8:33 am

So don't shoot ammo in a gun made to shoot a different cartridge? Got it!

:cheers:
User avatar
Erud
 
Posts: 2517 [View]
Joined: Tue Jul 31, 2007 6:31 am
Location: SE Metro

Re: 300 Black out owners! Alert!

Postby BigBlue on Tue Jul 31, 2018 9:50 am

BuckKlier wrote:When the Bolt slams shut it pushes the bullet deeper into the case. this was a factory load (Remington) with not much cantalure on the bullet and little to no crimp.


Ah...
BigBlue
 
Posts: 2233 [View]
Joined: Fri Oct 23, 2009 9:33 pm

Re: 300 Black out owners! Alert!

Postby photogpat on Tue Jul 31, 2018 10:09 am

Known issue with <150gr bullets. I painted the bottom of all my 300BLK mags orange, or have upgraded to the 300BLK dedicated mags from Magpul.
Nothing to see here. Continue swimming.
User avatar
photogpat
 
Posts: 3701 [View]
Joined: Sun Jun 06, 2010 1:01 pm
Location: Securely barricaded

Re: 300 Black out owners! Alert!

Postby LarryFlew on Tue Jul 31, 2018 10:31 am

photogpat wrote:Known issue with <150gr bullets. I painted the bottom of all my 300BLK mags orange, or have upgraded to the 300BLK dedicated mags from Magpul.


Ditto, marked rounds and white mags. Sub sonics white mags with blue band.
If you're having second thoughts you're two ahead of most Democrats
User avatar
LarryFlew
 
Posts: 5136 [View]
Joined: Fri Jun 19, 2009 7:37 am
Location: Hamburg, MN - CZ fan - Class of 66 - USAF 66-70 - NRA life since 1970

Re: 300 Black out owners! Alert!

Postby 2in2out on Tue Aug 14, 2018 6:48 pm

I use completely different mags for my 300blk and rubber bands on each one to label super or sub-sonic. Of all places, I got the bands from a seller on Amazon, and they look like wrist bands. I probably could've saved money and just used regular rubber bands, but these look cooler and I thought being able to label each mag was worth it.

I'm using Lancer 300blk mags which are supposed to handle the bigger sub-sonic bullet noses better than standard mags. I have not noticed a difference, but again was an excuse to do something that would help me tell them apart from my other AR mags.
"...the liberties of the American people were dependent upon the ballot-box, the jury-box, and the cartridge-box; that without these no class of people could live and flourish in this country..." ---Frederick Douglass
User avatar
2in2out
 
Posts: 1014 [View]
Joined: Wed Feb 25, 2009 10:19 am
Location: SE MN

Re: 300 Black out owners! Alert!

Postby Ghost on Tue Aug 14, 2018 7:04 pm

Oops
User avatar
Ghost
 
Posts: 8246 [View]
Joined: Wed Feb 05, 2014 8:49 pm

Re: 300 Black out owners! Alert!

Postby Holland&Holland on Tue Aug 14, 2018 9:44 pm

Erud wrote:So don't shoot ammo in a gun made to shoot a different cartridge? Got it!

:cheers:


Minor technicalities
User avatar
Holland&Holland
 
Posts: 12615 [View]
Joined: Mon Jan 12, 2009 9:17 am

Re: 300 Black out owners! Alert!

Postby minnhawk on Wed Sep 12, 2018 5:24 pm

photogpat wrote:Known issue with <150gr bullets. I painted the bottom of all my 300BLK mags orange, or have upgraded to the 300BLK dedicated mags from Magpul.



Yep! I painted an 2" OD green stripe on the bottom of the my 300BLK Magpuls ('cuz tactical) to avoid loading 300BLK into my .223. Still scary to consider it happening. My Daniel Defense 300BLK looks alot different than my .223, but still...
Eleven-Bravo, 1/4 INF, 3ID
minnhawk
 
Posts: 194 [View]
Joined: Fri Oct 26, 2012 3:40 pm

Next

Return to General Gun Chat

Who is online

Users browsing this forum: No registered users and 24 guests

cron