Mosin Accurizing Kit... Thoughts?

[Smith Sights]

This is a basic accurizing kit for the Mosin-Nagant.

This is the first basic accurizing kit and will work for the majority of the Russian and Chinese Mosin-Nagant rifles and carbines out there.

Included:

•1 front and 1 rear shim. These are thick and eliminate random pressure points in the stock bedding.

•1 recoil lug shim. This keeps your Mosin's action tight against the recoil lug in its stock, providing repeatability shot-to-shot. An added benefit is that the screws don't absorb the recoil and so stay tight.

•One barrel pressure pad. Taming barrel harmonics is essential to precision and accuracy.

•Instructions are included.

The tang shim is smaller than is usually seen, and the shims that should be steel, are, with the recoil lug shim being brass.

The pressure point is thin, oiled gasket stock, but I may change this to slightly thicker cork gasket. The fiber gasket just holds oil better and should work for the majority of people.

What do you think?

Regards,

Josh

[Eleanor08]

Not really a Mosin if its accurate is it?

JK. I suppose it can't hurt anything, the best thing I did was work the trigger. Mine would not even fire unless I jerked the trigger, I schit you not.. Lol! If you did a smooth squeeze you would bottom the trigger out and it would release the firing pin.

[Ironbear]

Improve accuracy from 1 MOA (Minute of Army) to 1/2 MOA!!!

[LumberZach]

I am not sure how much it is, but if I am putting any money into my mosin I will be getting one of the timney trigger kits. Just can't bring myself to finally spend the money on a gun that is good enough for what it does.

[pj62]

I had read on another form about putting some gasket cork underneath the barrel to help with accuracy. I got the cork gasket but have not tried it yet. To many other things going on.