GRS stock

[Bearcatrp]

Anyone own one of these? Am considering one to swap out on my Savage 10 FCP SR. Any info appreciated.

https://www.eurooptic.com/GRS-Fenris-Sa ... 05076.aspx

[Jackpine Savage]

No experience with that one. I put a MDT Oryx chassis on my Savage, happy with that.

[xd ED]

I put a GRS laminate stock on a Tikka 3x.
I did the piller and bedding job myself, and spent a lot of time finishing the wood.......all worked out good....made for a nice looking, and supremely accurate target rifle.
I don't know that the brand is widely used, but from my singular experience, I'd perhaps do it again if I couldn't find a chassis stock - which were not as available when I built my rifle.

[Bearcatrp]

No experience with that one. I put a MDT Oryx chassis on my Savage, happy with that.

Been looking at the Oryx too. The GRS is a bit cheaper. Almost bought the GRS years ago when I had my savage 10T. Bought a cadex instead. Both long gone. Just wanting to get away from the POS magazines from savage. Thought about getting a RPR or Seekins and sell the savage but it shoots sub MOA @100 yards. Took me awhile to get the load right shooting 200 gr ELD-X in 308 but it’s a laser now. Thanks for the replies folks.

[Bearcatrp]

GRS said it won't fit my 10 FCP. Back to searching.

[Jackpine Savage]

If your bolt release is on the side and not in the trigger guard I've got a couple HS Precision stocks, one with Accurate mag bottom metal that I'd part with.

[Bearcatrp]

I went ahead and ordered it. GRS said the bit frost is made for the savage. The Fenris I ordered has the same discription as the bit frost. Ordered from Amazon since they have a good return policy. Be here next week so will find out soon enough. Got a pic of your HS precision stock in case this doesn’t work out?

[Jackpine Savage]

It's this one: https://hsprecision.com/product/pst114/

Both stocks are dark grey.

One of them has a kydex adjustable cheek piece that I added.

[Bearcatrp]

Thanks. Will get back to you once I see if the GRS will work.

[Bearcatrp]

Installed the GRS today. Fit good. Won’t need your stock. Thanks for the offer though.